[c-nsp] X6708-10G-3C compatible with 7604 chassis?

[Jared Mauch]

On Thu, Mar 20, 2014 at 01:41:12PM -0700, Pete Templin wrote:
> 
> On 3/20/2014 1:23 PM, Lobo wrote:
> >xxxxxxx#sh module
> >Mod  Sub-Module                  Model              Serial Hw Status
> >---- --------------------------- ------------------ -----------
> >------- -------
> >  1  Policy Feature Card 3       7600-PFC3CXL-10GE  JAE14360195 1.2    Ok
> >  2  Distributed Forwarding Card WS-F6700-DFC3C     SAL15129JJT
> >1.4    PwrDown
> >
> Here's your answer: incompatible xFC models.  You have a 3CXL
> supervisor but a 3C DFC aboard the 10G card.  It won't power up when
> inserted into a running system.
> 
> Step 1: remove the module immediately.  If the device reloads <now>,
> it'll reboot into 3C mode, which means insufficient FIB slots for a
> full table, and that's Bad News(tm).
> 
> Step 2: get a WS-F6700-DFC3CXL and replace the -DFC3C.
> 
> Step 3: reinsert the card.

	one could swap the DFC with a CFC depending on your
needs as well.

	- jared

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.