[c-nsp] NX-OS Default MSDP Peer

[Vitkovský Adam]

> I am unable to find an equivalent command to "ip msdp default-peer" in NX-
> OS,

Well you can configure the N7K to become a part of the existing mesh-group. 

Some thoughts that might help you decide.
RPF Checks are not done in the following cases:
- If the sending MSDP peer is the only MSDP Peer. This would be the case if a single 'msdp-peer' command is configured or if only the 'default-peer' command is used. 
- If the sending MSDP peer is a Mesh-Group peer. 
- If the sending MSDP peer address is the RP address contained in the SA message. 


adam