[c-nsp] Packet Lost on interface Loopback

[Gert Doering]

Hi,

On Sat, May 03, 2014 at 02:23:13PM +0700, vannara vuth wrote:
> I'm also facing the similar issue. What was symtom on your router when
> receiving the log message? Packet loss to v4 address on loop back as well?

If you run into MLS CEF exception mode, some of your v4 traffic will
be software switched, *and* subject to MLS rate limiters - so you'll
see heavy packet loss on transit traffic to *some* destinations.

Unfortunately the only way to clear the exception is to reboot.

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 305 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20140503/89512d2f/attachment-0001.sig>