[c-nsp] ASR1001 with SPA-5X1GE-V2
Hagen AMEN
hagen.a.amen at multco.us
Tue May 13 11:36:10 EDT 2014
Actually, Chris, looking at your e-mail again, I might be led to think you
were sold SPA-5X1GE cards (rather than v2).
I don't think the original Ethernet SPAs are supported in the ASR1K
platform.
Sincerely,
Hagen Amen
On Tue, May 13, 2014 at 4:45 AM, Hagen AMEN <hagen.a.amen at multco.us> wrote:
> I have several operating in ASR1001s, no apparent issues.
>
> westdc-edge1#sh platform
> Chassis type: ASR1001
>
> Slot Type State Insert time (ago)
> --------- ------------------- --------------------- -----------------
> 0 ASR1001 ok 28w6d
> 0/0 ASR1001 ok 28w6d
> 0/1 SPA-5X1GE-V2 ok 28w6d
> R0 ASR1001 ok, active 28w6d
> F0 ASR1001 ok, active 28w6d
>
> westdc-edge1#sh ver
> [snip]
> IOS XE Version: 03.07.04.S
>
> westdc-edge1#show hw-mod subslot 0/1 fpd
>
> =============================================
> H/W Field Programmable Current Min.
> Required
> Slot Card Type Ver. Device: "ID-Name" Version
> Version
> ================== =========== ==============
> 0/1 SPA-5X1GE-V2 1.2 1-GE I/O FPGA 1.10 1.10
> =============================================
>
> --
> Hagen Amen | IT Networking
>
>
> On Tue, May 13, 2014 at 1:48 AM, Mark Tinka <mark.tinka at seacom.mu> wrote:
>
>> On Tuesday, May 13, 2014 10:33:38 AM Chris Balmain wrote:
>>
>> > Has anyone else got SPA-5X1GE-V2 functioning on the
>> > ASR1001 specifically? Anyone seen this issue before?
>> > Have I received bad hardware?
>>
>> I'd also be interested in learning about this, as I've
>> ditched my ASR1001 purchases and won't be able to test this
>> on my own.
>>
>> Mark.
>>
>> _______________________________________________
>> cisco-nsp mailing list cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>
>
>
> --
> Hagen Amen : Multco Network : 503-988-5227
>
--
Hagen Amen : Multco Network : 503-988-5227
More information about the cisco-nsp
mailing list