[c-nsp] ASR1001 with SPA-5X1GE-V2

[Chris Balmain]

Yeah, looks like I've been sold the non-V2 ones. I wasn't sure, as the 
label said "SPA-5X1GE V02" but I've just found some more photos of the 
same label on a proper V2, and it reads "SPA-5X1GE-V2 V01"

Thanks guys.


On 14/05/14 01:36, Hagen AMEN wrote:
> Actually, Chris, looking at your e-mail again, I might be led to think 
> you were sold SPA-5X1GE cards (rather than v2).
>
> I don't think the original Ethernet SPAs are supported in the ASR1K 
> platform.
>
> Sincerely,
>
> Hagen Amen
>
>
> On Tue, May 13, 2014 at 4:45 AM, Hagen AMEN <hagen.a.amen at multco.us 
> <mailto:hagen.a.amen at multco.us>> wrote:
>
>     I have several operating in ASR1001s, no apparent issues.
>
>     westdc-edge1#sh platform
>     Chassis type: ASR1001
>
>     Slot      Type                State             Insert time (ago)
>     --------- ------------------- --------------------- -----------------
>     0         ASR1001             ok            28w6d
>      0/0      ASR1001             ok            28w6d
>      0/1      SPA-5X1GE-V2        ok            28w6d
>     R0        ASR1001             ok, active            28w6d
>     F0        ASR1001             ok, active            28w6d
>
>     westdc-edge1#sh ver
>     [snip]
>     IOS XE Version: 03.07.04.S
>
>     westdc-edge1#show hw-mod subslot 0/1 fpd
>
>     =============================================
>            H/W   Field Programmable   Current Min. Required
>     Slot Card Type               Ver.  Device: "ID-Name"    Version  
>        Version
>     ================== =========== ==============
>      0/1 SPA-5X1GE-V2      1.2   1-GE I/O FPGA          1.10  1.10
>     =============================================
>
>     -- 
>     Hagen Amen  |  IT Networking
>
>
>     On Tue, May 13, 2014 at 1:48 AM, Mark Tinka <mark.tinka at seacom.mu
>     <mailto:mark.tinka at seacom.mu>> wrote:
>
>         On Tuesday, May 13, 2014 10:33:38 AM Chris Balmain wrote:
>
>         > Has anyone else got SPA-5X1GE-V2 functioning on the
>         > ASR1001 specifically? Anyone seen this issue before?
>         > Have I received bad hardware?
>
>         I'd also be interested in learning about this, as I've
>         ditched my ASR1001 purchases and won't be able to test this
>         on my own.
>
>         Mark.
>
>         _______________________________________________
>         cisco-nsp mailing list cisco-nsp at puck.nether.net
>         <mailto:cisco-nsp at puck.nether.net>
>         https://puck.nether.net/mailman/listinfo/cisco-nsp
>         archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>
>
>     -- 
>     Hagen Amen : Multco Network : 503-988-5227 <tel:503-988-5227>
>
>
>
>
> -- 
> Hagen Amen : Multco Network : 503-988-5227