[c-nsp] ifIndex-table

Mon May 19 12:09:42 EDT 2014

If you have a spare 720, you should be able to boot the spare perform a
switch to the spare-sup, replace the main one, and switch back.  That way
you should keep the box running with all configuration and the indexes

Kind regards,
Sibbi

On 19.5.2014 15:56, "Antonio Soares" <amsoares at netcabo.pt> wrote:

>Hello guys,
>
>I need to replace a few SUP720s. In order to keep the same interfaces
>indexes, the only way I see to achieve that easily is moving the
>nvram:ifIndex-table from the old SUP to the new SUP. Does it work ?
>
>This document says that the file can be downloaded and viewed:
>
>http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-pro
>to
>col-snmp/28420-ifIndex-Persistence.html
>
>But nothing about moving it to a new SUP/Router.
>
>
>Thanks.
>
>Regards,
>
>Antonio Soares, CCIE #18473 (RS/SP)
>amsoares at netcabo.pt
>http://www.ccie18473.net
>
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/