[c-nsp] apply rate limit to VFI interface

[Vitkovský Adam]

Hello Alejandro,
I think you can only rate-limit on EFPs ingress/egress to/from a particular PW.


adam
> -----Original Message-----
> From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
> Alejandro Aristizabal
> Sent: Friday, May 23, 2014 5:13 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] apply rate limit to VFI interface
> 
> 
> Good,
> 
> 
> 
> Any one knows how to aplly rate limit to VFI interfaces on IOS XR?, thnks.
> 
> Id appreciate it.
> 
> good luck
> 
> 
> --
> Alejandro Aristizabal
> Analista de Interconexión
> Email: aaristizabal at mediacommerce.net.co
> Móvil: 3206777514
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/