[c-nsp] Affinity/Link coloring

[Johan Borch]

What would be the best way to implement this in an exisiting network, with
minimal downtime? If tunnels are equiped with affinity values I guess they
won't come up if the interfaces are not configured, is it better to go
through all interfaces in the network and set the attribute values and then
modify all tunnels and hope no tunnels go down during the work?

Johan

On Wed, Nov 5, 2014 at 12:46 AM, Phil Bedard <philxor at gmail.com> wrote:

> Yes they use the same affinity attribute. Junos just associates a name
> with the value to make it easier to deal with.  IOS-XR is similar to
> Junos, they use an affinity-map with a name to value mapping and you
> assign affinities by name.
>
> Phil
>
>
>
>
> On 11/4/14, 7:38 PM, "Johan Borch" <johan.borch at gmail.com> wrote:
>
> >Hi!
> >
> >A question about link coloring. Is Ciscos affinity compatible with
> >Junipers
> >administrative groups.
> >
> >Thanks
> >Johan
> >_______________________________________________
> >cisco-nsp mailing list  cisco-nsp at puck.nether.net
> >https://puck.nether.net/mailman/listinfo/cisco-nsp
> >archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>