[c-nsp] Me3800 EVC E-tree

[Vitkovský Adam]

Hi Darwin,

This is where the mef-cecp would get handy as I'm not 100% sure what you mean by e-tree. 
But this is what you can do: 

interface gi0/0
 service instance 123 ethernet 
   description Link to E-Tree root
   encap dot1q 10 ethernet
   rewrite ingress tag pop 1 symmetric
   bridge-domain 123

l2 vfi E-Tree 
 vpn id 1
 bridge-domain 123
 neighbor x.x.x.x 100 encapsulation mpls 
 neighbor y.y.y.y 200 encapsulation mpls 


You can also associate VLAN interface with this setup to have a L3 interface. 

adam
> -----Original Message-----
> From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
> Darwin L.
> Sent: Friday, October 10, 2014 1:59 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Me3800 EVC E-tree
> 
> Hi Guys,
> 
> Anybody know how I can do a configuration rooted to multipoint (e-tree) on
> L2 in the Cisco me3800 using iOS 15.3.
> 
> Thanks in advance.
> 
> << Darwin Santana >>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/