[c-nsp] Me3800 EVC E-tree

Waris Sagheer (waris) waris at cisco.com
Fri Oct 10 04:59:16 EDT 2014


You can also use split horizon for E-Tree.

Best Regards,

[http://www.cisco.com/web/europe/images/email/signature/horizontal06.jpg]

Waris Sagheer
Technical Marketing Manager
Service Provider Access Group (SPAG)
waris at cisco.com<mailto:waris at cisco.com>
Phone: +1 408 853 6682
Mobile: +1 408 835 1389

CCIE - 19901


<http://www.cisco.com/>



This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.

For corporate legal information go to:http://www.cisco.com/web/about/doing_business/legal/cri/index.html



From: adam vitkovsky <adam.vitkovsky at swan.sk<mailto:adam.vitkovsky at swan.sk>>
Date: Friday, October 10, 2014 at 12:44 AM
To: "Darwin L." <tech at casainteligente.com.do<mailto:tech at casainteligente.com.do>>, "cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>" <cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>>
Subject: Re: [c-nsp] Me3800 EVC E-tree

Hi Darwin,

This is where the mef-cecp would get handy as I'm not 100% sure what you mean by e-tree.
But this is what you can do:

interface gi0/0
service instance 123 ethernet
   description Link to E-Tree root
   encap dot1q 10 ethernet
   rewrite ingress tag pop 1 symmetric
   bridge-domain 123

l2 vfi E-Tree
vpn id 1
bridge-domain 123
neighbor x.x.x.x 100 encapsulation mpls
neighbor y.y.y.y 200 encapsulation mpls


You can also associate VLAN interface with this setup to have a L3 interface.

adam
-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
Darwin L.
Sent: Friday, October 10, 2014 1:59 AM
To: cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
Subject: [c-nsp] Me3800 EVC E-tree
Hi Guys,
Anybody know how I can do a configuration rooted to multipoint (e-tree) on
L2 in the Cisco me3800 using iOS 15.3.
Thanks in advance.
<< Darwin Santana >>
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list