[c-nsp] Me3800 EVC E-tree

[Darwin L.]

Hi Adam. Thank for the the information. I will try this config and I'll let you know.

Regards,

<< Darwin Santana >>

> On Oct 10, 2014, at 3:44 AM, Vitkovský Adam <adam.vitkovsky at swan.sk> wrote:
> 
> Hi Darwin,
> 
> This is where the mef-cecp would get handy as I'm not 100% sure what you mean by e-tree. 
> But this is what you can do: 
> 
> interface gi0/0
> service instance 123 ethernet 
>   description Link to E-Tree root
>   encap dot1q 10 ethernet
>   rewrite ingress tag pop 1 symmetric
>   bridge-domain 123
> 
> l2 vfi E-Tree 
> vpn id 1
> bridge-domain 123
> neighbor x.x.x.x 100 encapsulation mpls 
> neighbor y.y.y.y 200 encapsulation mpls 
> 
> 
> You can also associate VLAN interface with this setup to have a L3 interface. 
> 
> adam
>> -----Original Message-----
>> From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
>> Darwin L.
>> Sent: Friday, October 10, 2014 1:59 AM
>> To: cisco-nsp at puck.nether.net
>> Subject: [c-nsp] Me3800 EVC E-tree
>> 
>> Hi Guys,
>> 
>> Anybody know how I can do a configuration rooted to multipoint (e-tree) on
>> L2 in the Cisco me3800 using iOS 15.3.
>> 
>> Thanks in advance.
>> 
>> << Darwin Santana >>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/