[c-nsp] Any one ever worked on Cisco 6500 QOS specifically 6503 or 6524(help) needed
Ahsan Rasheed
ahsanrasheed9 at gmail.com
Sun Oct 12 01:27:42 EDT 2014
Hi All,
I am having issue specifically doing QOS configuration on 6503 or 6524 or
6509 switches. I am unable to match any EF(voice) traffic for eompls(vlan
based) on 6503 cisco switch. If i use any other router as 2811 or 2821 my
QOS configuration works perfect but if i put 6503 as PE2 it does not work.i
am using vlan based eompls.
Below is the scenario & configuration which i am having issue.
CE1(2821 router)(dot1Q)--------->PE1(2821 router)------->P(6524
switch)-------->PE2(6503 switch)------->(dot1Q)(2821 switch)CE2.
On CE1 i can match ip-precedence 5 traffic and mark that traffic to cos5 on
outbound port.On PE1 i can match cos5 packet and mark with mpls exp top5 on
inbound port, on outbound port i can match mpls exp 5.
On PE2(6503) i am unable to match that mpls exp5 packet on inbound port.
none of the configuration worked on 6500 series switches with mls qos, ,mls
qos trust dscp,mls qos trust cos etc. Although i can match cos5 traffic on
CE2 on inbound interface.i can not match mpls exp 5 traffic on 6503 and all
i can see traffic as default-class on 6503 switch. I tried many things and
many configurations on 6503 but nothing worked.If i put 2821 router as PE2
instead of 6503 my qos configuration works. but why if i put 6503 my same
qos configuration does not work?
---match means=classification or classify
Can anyone tell me how qos works on 6500 series switches or where i am
having issue in my scenario.
i am using this ios on 6503: s72033-advipservicesk9_wan-mz.122-33.SXI3.bin.
below r my questions for 6503 qos:
1.do i need to use some other map tables,am i using correct map tables on
6503 as cos-dscp,dscp-cos,exp-dscp etc.
2.any other configuration of qos needed on 6503?
3.i am unable to match anything on outbound port of 6503.
4.on 6503 i am using sup720 and PFC3BXL.any specific configuration needed
for PFC3bxl.
5. 6503 not allowing me to match qos-group on inbound interface, not
allowing me to set cos5 on outbound interface. not allowing me to set cos5
as an inbound interface.
CE1(2821) config:
------------------------
!
class-map match-any EF
match ip precedence 5
class-map match-any data
match ip precedence 3
!
!
policy-map ip2mpls
class EF
set cos 5
class data
set cos 3
!
interface FastEthernet0/0
no ip address
duplex auto
speed auto
!
interface FastEthernet0/0.455
encapsulation dot1Q 455
ip address 172.16.15.1 255.255.255.252
service-policy output EF
!
PE1(2821) config:
-------------------------
-------------------------
mls qos map cos-dscp 0 8 16 24 32 40 48 56
!
class-map match-all exp_3
match mpls experimental topmost 3
class-map match-all mpls_exp
match mpls experimental topmost 5
class-map match-any cos3
match cos 3
class-map match-any LOO1
match cos 5
!
!
policy-map EF
class LOO1
set mpls experimental imposition 5
class cos3
set mpls experimental imposition 3
policy-map QOS_G_5
class mpls_exp
priority
class exp_3
bandwidth 500
!
interface Loopback0
ip address 3.3.3.3 255.255.255.255
!
interface FastEthernet0/0
ip address 192.168.23.2 255.255.255.0
ip ospf network point-to-point
duplex auto
speed auto
mpls ip
service-policy output QOS_G_5
!
interface FastEthernet0/1.455
encapsulation dot1Q 455
xconnect 5.5.5.5 455 encapsulation mpls
service-policy input EF
!
-------------------------------
-------------------------------
PE2(6503 qos):
R1#show module
Mod Ports Card Type Model Serial
No.
--- ----- -------------------------------------- ------------------
-----------
1 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE
SAL09401U2L
2 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX
SAL114247YN
3 16 16 port 1000mb GBIC ethernet WS-X6416-GBIC
SAL0712AM69
4 24 CEF720 24 port 1000mb SFP WS-X6724-SFP
SAL10019J4N
5 2 Supervisor Engine 720 (Hot) WS-SUP720-3BXL
SAD102805VM
6 2 Supervisor Engine 720 (Active) WS-SUP720-BASE
SAD0846060F
Mod Sub-Module Model Serial Hw
Status
---- --------------------------- ------------------ ----------- -------
-------
1 Distributed Forwarding Card WS-F6700-DFC3BXL SAD102504EF 5.3 Ok
2 Centralized Forwarding Card WS-F6700-CFC SAD111300PD 3.1 Ok
4 Centralized Forwarding Card WS-F6700-CFC SAL1004BQ2A 2.0 Ok
5 Policy Feature Card 3 WS-F6K-PFC3BXL SAD10270189 1.8 Ok
5 MSFC3 Daughterboard WS-SUP720 SAD102801G5 2.5 Ok
6 Policy Feature Card 3 WS-F6K-PFC3BXL SAL1415FE95 1.11 Ok
6 MSFC3 Daughterboard WS-SUP720 SAD08440794 2.4 Ok
R1#show mls qos maps
Normal Burst Policed-dscp map: (dscp=
d1d2)
d1 : d2 0 1 2 3 4 5 6 7 8 9
-------------------------------------
0 : 01 01 02 03 04 05 06 07 08 09
1 : 10 11 12 13 14 15 16 17 18 19
2 : 20 21 22 23 24 25 26 27 28 29
3 : 30 31 32 33 34 35 36 37 38 39
4 : 40 41 42 43 44 45 01 47 48 49
5 : 50 51 52 53 54 55 56 57 58 59
6 : 60 61 62 63
Maximum Burst Policed-dscp map: (dscp=
d1d2)
d1 : d2 0 1 2 3 4 5 6 7 8 9
-------------------------------------
0 : 00 01 02 03 04 05 06 07 08 09
1 : 10 11 12 13 14 15 16 17 18 19
2 : 20 21 22 23 24 25 26 27 28 29
3 : 30 31 32 33 34 35 36 37 38 39
4 : 40 41 42 43 44 45 46 47 48 49
5 : 50 51 52 53 54 55 56 57 58 59
6 : 60 61 62 63
Dscp-cos map: (dscp= d1d2)
d1 : d2 0 1 2 3 4 5 6 7 8 9
-------------------------------------
0 : 00 00 00 00 00 00 00 00 01 01
1 : 01 01 01 01 01 01 02 02 02 02
2 : 02 02 02 02 03 03 03 03 03 03
3 : 03 03 04 04 04 04 04 04 04 04
4 : 05 05 05 05 05 05 05 05 06 06
5 : 06 06 06 06 06 06 07 07 07 07
6 : 07 07 07 07
Dscp-exp map: (dscp= d1d2)
d1 : d2 0 1 2 3 4 5 6 7 8 9
-------------------------------------
0 : 00 00 00 00 00 00 00 00 01 01
1 : 01 01 01 01 01 01 02 02 02 02
2 : 02 02 02 02 03 03 03 03 03 03
3 : 03 03 04 04 04 04 04 04 04 04
4 : 05 05 05 05 05 05 05 05 06 06
5 : 06 06 06 06 06 06 07 07 07 07
6 : 07 07 07 07
Cos-dscp map:
cos: 0 1 2 3 4 5 6 7
------------------------------------
dscp: 0 10 18 24 34 46 48 56
IpPrecedence-dscp map:
ipprec: 0 1 2 3 4 5 6 7
------------------------------------
dscp: 0 8 16 24 32 40 48 56
Exp-dscp map:
exp: 0 1 2 3 4 5 6 7
------------------------------------
dscp: 0 8 16 24 32 40 48 56
mls netflow interface
mls qos map cos-dscp 0 10 18 24 34 46 48 56
mls qos
!
class-map match-all exp_3
match mpls experimental topmost 3
class-map match-all EXP_5
match mpls experimental topmost 5
class-map match-all QOS_GROUP_5
match qos-group 5
class-map match-all prec5
match ip precedence 5
class-map match-all cos5
match cos 5
!
policy-map mpls2ip
class QOS_GROUP_5
set cos 5
!
policy-map IN_FROM_R3
class EXP_5
set qos-group 5
!
interface Loopback0
ip address 5.5.5.5 255.255.255.255
!
interface GigabitEthernet2/2
mls qos trust cos
or <------------ (tried both individually but none worked)
mls qos trust dscp
!
interface GigabitEthernet2/2.455
encapsulation dot1Q 455
xconnect 3.3.3.3 455 encapsulation mpls
service-policy output mpls2ip
!
interface GigabitEthernet2/1
ip address 192.168.34.4 255.255.255.0
ip ospf network point-to-point
mls qos trust cos
or <------------ (tried both individually but none worked)
mls qos trust dscp
mpls ip
service-policy input IN_FROM_R4
!
Thanks & regards,
Ahsan Rasheed
More information about the cisco-nsp
mailing list