[c-nsp] Determining number of BGP advertised routes in IOS XR

[Ahmad Fadli Robbi]

Hi John,

You could try this to show advertise routes in IOS XR


sh bgp neighbor (neighbor peer) advertised-routes


Regards


Fadel
On Thu, Oct 23, 2014 at 2:00 AM, John Neiberger <jneiberger at gmail.com>
wrote:

> Other vendors make this very easy, so I feel like I must be missing
> something. Is there a fast way to determine the number of prefixes being
> advertised to a neighbor? For anything approaching a full table, "show bgp
> ipv4 uni nei <ip> advertised-routes | i prefix" can take a couple of
> minutes to complete. Juniper and others seem to just put this info into the
> output of "show bgp neighbor", which makes it super easy.
>
> I see that IOS XR has a field that is tantalizingly close called "prefix
> advertised" but that seems to be the total of all advertisements since the
> peer came up. For example, the peer I'm looking at right now shows 4.7
> million prefixes advertised, which I think might be a bit overestimating
> things.  :)
>
> So, what am I missing? Is there really not an easier way in XR to get this
> simple piece of information?
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>