[c-nsp] Silly question regarding C3K-NM-10G

[Mike Hale]

You should just be able to pull it out...I don't think there's a tab
since it's held in place with the two screws.  I don't remember any
tabs on the ones I've removed.

On Thu, Sep 11, 2014 at 7:54 AM, Scott Granados <scott at granados-llc.net> wrote:
> Carefully as apposed to what, recklessly press the tab with a hammer?
>
> ;)
>
> On Sep 11, 2014, at 10:12 AM, Drew Weaver <drew.weaver at thenap.com> wrote:
>
>> In the instructions for removing a network module from a 3560x it states 'carefully press the tab on the right side of the module'.
>>
>> I can't seem to locate a tab on the NM-10G which releases it from the slot.
>>
>> Is it under the mounting bracket? Under the faceplate? Is anyone aware of where this mythical tab resides?
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/



-- 
09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0