[c-nsp] Silly question regarding C3K-NM-10G

[Scott Harvanek]

Same here, I do not recall any tabs.

Scott H.

On 9/11/14, 11:16 AM, Mike Hale wrote:
> You should just be able to pull it out...I don't think there's a tab
> since it's held in place with the two screws.  I don't remember any
> tabs on the ones I've removed.
>
> On Thu, Sep 11, 2014 at 7:54 AM, Scott Granados <scott at granados-llc.net> wrote:
>> Carefully as apposed to what, recklessly press the tab with a hammer?
>>
>> ;)
>>
>> On Sep 11, 2014, at 10:12 AM, Drew Weaver <drew.weaver at thenap.com> wrote:
>>
>>> In the instructions for removing a network module from a 3560x it states 'carefully press the tab on the right side of the module'.
>>>
>>> I can't seem to locate a tab on the NM-10G which releases it from the slot.
>>>
>>> Is it under the mounting bracket? Under the faceplate? Is anyone aware of where this mythical tab resides?
>>> _______________________________________________
>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>