[c-nsp] Removing An Interface from a Port Channel

[Mikael Abrahamsson]

On Mon, 22 Sep 2014, Harry Hambi - Atos wrote:

> I have a trunk with 4 interfaces what is the quickest way to remove ONE 
> interface from the Port channel?, is the command Default interface gi 
> x/y/z adequate?. Thanks in advance. A colleague of mine removed an 
> interface recently from a port channel and the interface retained the 
> information that was applied by being a member of the port channel this 
> caused a loop. Don't want to repeat this.

Are you running LACP or not?

-- 
Mikael Abrahamsson    email: swmike at swm.pp.se