[c-nsp] Removing An Interface from a Port Channel

[A.L.M.Buxey at lboro.ac.uk]

Hi,

> I have a trunk with 4 interfaces what is the quickest way to remove ONE interface from the Port channel?, is the  command Default interface gi x/y/z adequate?.
> Thanks in advance. A colleague of mine removed an interface  recently from a port channel and the interface retained the information that was applied by being a member of the port channel this caused a loop. Don't want to repeat this.

remove the channel-group component on the interface itself - however, is it still linked physically
and does the other end still have it as part of the port channel?  safest method involves shutting
down the interface at each end , making changes, then unshutting (ensuring the physical
linkage is how you want it first!)

alan