[c-nsp] Limited number of VFIs

Mark Tinka mark.tinka at seacom.mu
Thu Apr 2 02:52:40 EDT 2015


The ME3600X only supported H-VPLS initially.

Full VPLS support came after lots of kicking and screaming. Cisco had
initially left it only for the ME3800X, but the ME3600X got it soon
after launch.

Mark.

On 1/Apr/15 15:14, M K wrote:
>
> Thanks Mark
> But what do u mean by full VPLS support.?
> ------------------------------------------------------------------------
> From: gunner_200 at live.com
> To: cisco-nsp at puck.nether.net; ulrik.ivers at excanto.se
> Subject: RE: Limited number of VFIs
> Date: Wed, 1 Apr 2015 00:12:57 +0300
>
> Even with a different IOS image ? or template change ?
>
> ------------------------------------------------------------------------
> From: gunner_200 at live.com
> To: cisco-nsp at puck.nether.net
> Subject: RE: Limited number of VFIs
> Date: Tue, 31 Mar 2015 23:58:46 +0300
>
> SW(config)#l2 vfi test autodiscovery
> Maximum number of VFIs 26 have been configured.
> % Cannot create more VFIs
>
> ------------------------------------------------------------------------
> From: gunner_200 at live.com
> To: cisco-nsp at puck.nether.net
> Subject: Limited number of VFIs
> Date: Tue, 31 Mar 2015 22:55:47 +0300
>
> Hi all
> I have ME3600X with the below software and licence
>
> System image file is "flash:/me360x-universal-mz.153.bin"
> License Level: AdvancedMetroIPAccess
> License Type: Permanent
>
> I am configuring several VFIs , when I reach number 27 (total) I get
> prompted that I have reached the maximum number , is that a bug or normal?
>
> Thanks



More information about the cisco-nsp mailing list