[c-nsp] Limited number of VFIs

[M K]

Thanks Mark/Mark for the effort

Subject: Re: Limited number of VFIs
To: gunner_200 at live.com; cisco-nsp at puck.nether.net; ulrik.ivers at excanto.se
From: mark.tinka at seacom.mu
Date: Thu, 2 Apr 2015 08:52:40 +0200


  
    
  
  
    The ME3600X only supported
      H-VPLS initially.

      

      Full VPLS support came after lots of kicking and screaming. Cisco
      had initially left it only for the ME3800X, but the ME3600X got it
      soon after launch.

      

      Mark.

    

    On 1/Apr/15 15:14, M K wrote:

    
    
      
      
      

        Thanks Mark
        But what do u mean by full
            VPLS support.?
          
            From: gunner_200 at live.com

            To: cisco-nsp at puck.nether.net; ulrik.ivers at excanto.se

            Subject: RE: Limited number of VFIs

            Date: Wed, 1 Apr 2015 00:12:57 +0300

            

            
            Even with a different IOS image ? or template
              change ?

              

              
                From: gunner_200 at live.com

                To: cisco-nsp at puck.nether.net

                Subject: RE: Limited number of VFIs

                Date: Tue, 31 Mar 2015 23:58:46 +0300

                

                
                
                    SW(config)#l2
                          vfi test autodiscovery
                    Maximum
                          number of VFIs 26 have been configured.
                    % Cannot
                          create more VFIs
                  

                  
                    From: gunner_200 at live.com

                    To: cisco-nsp at puck.nether.net

                    Subject: Limited number of VFIs

                    Date: Tue, 31 Mar 2015 22:55:47 +0300

                    

                    
                    Hi all
                      I have ME3600X with the below software and
                        licence
                      

                      
                      
                        System image file is
                          "flash:/me360x-universal-mz.153.bin"
                        License Level: AdvancedMetroIPAccess
                        License Type: Permanent
                      
                      

                      
                      I am configuring several VFIs , when I reach
                        number 27 (total) I get prompted that I have
                        reached the maximum number , is that a bug or
                        normal?
                      

                      
                      Thanks