[c-nsp] 7600 high cpu due to BGP process

[Mack McBride]

The usual response with code that old is to upgrade code.

Mack McBride | Network Architect | ViaWest, Inc.
O: 720.891.2502 | mack.mcbride at viawest.com | www.viawest.com | LinkedIn | Twitter | YouTube



-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of thiyagarajan b
Sent: Tuesday, April 07, 2015 2:26 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 7600 high cpu due to BGP process

Hi

7606 router with 3CXL runs 12.2(33)SRC4 version has high CPU due to BGP router and BGP scanner, when checked , there are no session flaps or route flaps and memory is 2GB with nearly 800MB free in it.

Any reason for this cause?

Warm Regards.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
This message contains information that may be confidential, privileged or otherwise protected by law from disclosure. It is intended for the exclusive use of the addressee(s). Unless you are the addressee or authorized agent of the addressee, you may not review, copy, distribute or disclose to anyone the message or any information contained within. If you have received this message in error, please contact the sender by electronic reply and immediately delete all copies of the message.