[c-nsp] Is there a command to check which BGP ingress policy drops the received prefix in Cisco ASR routers?

[Mark Tinka]

On 11/Aug/15 00:35, Adam Vitkovsky wrote:
>
> There is the "show ip bgp route-map" in vanilla IOS and "show bgp policy route-policy" in XR.

This is cool. Didn't know about this command.

The IPv6 version, of course, is "sh bgp ipv6 unicast route-map".

>
> And with regards to Martin's question there's the "sh bgp ipv4 unicast neighbors <neighbor-address> received prefix-filter <filter-name>" cmd to at least help you find/rule out prefix-filter responsible for the prefix blocking.

I've tested that command, doesn't seem to do anything. Neighbor is using
an RPL-based policy.

Mark.