[c-nsp] MPLS router-ID

[Nick Hilliard]

On 11/08/2015 14:39, Mohammad Khalil wrote:
> I have one of my PEs already configured with a router-id (which is my private loopback interface)
> Am trying to establish xconnect with my uplink provider (which uses Juniper)
> The SP insisted to use public IP address for LDP neighborship

inter-provider mpls is a mess which should be avoided if possible.  Can you
not set up two back-to-back l2vpns, one on your side and one on the
provider's side?  This will provide almost the same functionality with the
horror of inter-provider mpls.

Nick