[c-nsp] MPLS router-ID

[Mohammad Khalil]

Cisco side
mpls label protocol ldp
mpls ldp router-id Loopback0 force

interface FastEthernet1/0
 ip address 212.118.201.1 255.255.255.0
 mpls ip
 mpls ldp discovery transport-address 212.118.1.1
 mpls bgp forwarding

interface FastEthernet1/1.45
 encapsulation dot1Q 45
 xconnect 20.20.20.20 45 encapsulation mpls

router bgp 1
 bgp log-neighbor-changes
 no bgp default ipv4-unicast
 neighbor 212.118.201.20 remote-as 20
 !
 address-family ipv4
  network 212.118.1.1 mask 255.255.255.255
  neighbor 212.118.201.20 activate
  neighbor 212.118.201.20 send-label
 exit-address-family

I also tried the below commands
mpls ldp neighbor 20.20.20.20 targeted
mpls ldp discovery targeted-hello accept

interface Loopback0
 ip address 1.1.1.1 255.255.255.255

interface Loopback1
 ip address 212.118.1.1 255.255.255.255

> From: jwbensley at gmail.com
> Date: Wed, 12 Aug 2015 09:56:18 +0100
> To: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] MPLS router-ID
> 
> Mohamma,
> 
> Perhaps you can share some config with the list?
> 
> James.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/