[c-nsp] LACP Fast

[A.L.M.Buxey at lboro.ac.uk]

Hi,

> I have LACP fast enabled on  various port channels. I would like to revert back to default timers. Is it right that I need to delete the port channel first?, then remove the LACP fast from each interface in the port channel. I will be  doing this in the lab, any help appreciated.

if a lab then just do it - isnt that the point of the lab? see how things break
so you dont do it for real.

I'd say just perform the change on the port-channel, the interfaces within that port-channel
should all adopt the new settings  ;-)

alan