[c-nsp] LACP Fast

[Tom Storey]

There is also the "default" command.
On 12 Aug 2015 1:42 pm, <A.L.M.Buxey at lboro.ac.uk> wrote:

> Hi,
>
> > I have LACP fast enabled on  various port channels. I would like to
> revert back to default timers. Is it right that I need to delete the port
> channel first?, then remove the LACP fast from each interface in the port
> channel. I will be  doing this in the lab, any help appreciated.
>
> if a lab then just do it - isnt that the point of the lab? see how things
> break
> so you dont do it for real.
>
> I'd say just perform the change on the port-channel, the interfaces within
> that port-channel
> should all adopt the new settings  ;-)
>
> alan
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>