[c-nsp] ios vs ios-xe: interrface config rate-limit

Lukas Tribus luky-37 at hotmail.com
Fri Jul 10 04:03:03 EDT 2015


> Hi Mike,
> You can apply a policy map (which contains a shaper or rate-limiter) in
> each direction:
> Cisco-AVPair += ip:sub-qos-policy-in=10Mbps-rate-limit
> Cisco-AVPair += ip:sub-qos-policy-out=10Mbps-rate-limit
>
> policy-map 10Mbps-rate-limit
> class class-default
> police 10240000 1920000 3840000 conform-action transmit
> exceed-action drop
>
> Hope that's useful,

Correct. For the record, here's some documentation about this:

http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/bbdsl/configuration/xe-3s/asr1000/bba-xe-3s-asr1000-book/bba-ppoe-ses-q-rad-xe.html



Lukas

 		 	   		  


More information about the cisco-nsp mailing list