[c-nsp] IP on xconnect?

[Lukas Tribus]

> I have a pair of 1841s with a ds1 between them. I need to transport two
> untagged vlans over the T1 (VOICE and DATA). Right now I am doing it
> with the config below. The problem is that there is no management IP
> address on the boxes so I cannot diagnose outages without console
> access. Is there a way I can add an IP to the DATA vlan without adding
> hardware? Or is there a better way to do this?

I don't get the problem. Why don't you just use the loopbacks for MGM?
What prevents you from configuring MGM on the existing IP connectivity?


Lukas