[c-nsp] ABF not working
Harold 'Buz' Dale
buz.dale at usg.edu
Mon Jul 13 09:54:46 EDT 2015
I would think you could do something like this with the ACL.
ipv4 access-list internet
10 permit ipv4 10.0.0.0/16 10.0.0.0/16
20 permit ipv4 10.0.0.0/16 any nexthop1 ipv4 x.x.x.x
Where if it is from 10/16 to 10/16 it just gets routed normally and make
sure that normal routing works right.
Luck,
Buz
----------
buz.dale at usg.edu
Network Support Specialist University System of GA -IT Services.
706-583-2052 or (Toll Free in GA) 888-875-3697
On 7/13/15, 6:51 AM, "Alex William" <alex.william21 at outlook.com> wrote:
>ipv4 access-list internet
>10 permit ipv4 10.0.0.0/16 10.0.0.0/16 default
> 20 permit ipv4 10.0.0.0/16 any nexthop1 ipv4 x.x.x.x
>
More information about the cisco-nsp
mailing list