[c-nsp] ABF not working

kaviraj Daboo alex.william21 at outlook.com
Mon Jul 13 10:00:22 EDT 2015


Normal routing is OK. But re-routing to the nexthop is not working at all.
Instead of routing to x.x.x.x it is routed to router¹s default route.

Regards,
Alex

Le 7/13/15, 17:54, « Harold 'Buz' Dale » <buz.dale at usg.edu> a écrit :

>I would think you could do something like this with the ACL.
>
>ipv4 access-list internet
>10 permit ipv4 10.0.0.0/16 10.0.0.0/16
>20 permit ipv4 10.0.0.0/16 any nexthop1 ipv4 x.x.x.x
>
>
>
>Where if it is from 10/16 to 10/16 it just gets routed normally and make
>sure that normal routing works right.
>Luck,
>Buz
>
>----------
>buz.dale at usg.edu
>Network Support Specialist University System of GA -IT Services.
>706-583-2052 or (Toll Free in GA) 888-875-3697
> 
>
>
>
>
>
>
>On 7/13/15, 6:51 AM, "Alex William" <alex.william21 at outlook.com> wrote:
>
>>ipv4 access-list internet
>>10 permit ipv4 10.0.0.0/16 10.0.0.0/16 default
>>  20 permit ipv4 10.0.0.0/16 any nexthop1 ipv4 x.x.x.x
>>
>




More information about the cisco-nsp mailing list