[c-nsp] ABF not working
Alex William
alex.william21 at outlook.com
Mon Jul 13 10:01:46 EDT 2015
Normal routing is OK. But re-routing to the nexthop is not working at all.
Instead of routing to x.x.x.x it is routed to router’s default route.
Regards,
Alex
> From: buz.dale at usg.edu
> To: alex.william21 at outlook.com; cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] ABF not working
> Date: Mon, 13 Jul 2015 13:54:46 +0000
>
> I would think you could do something like this with the ACL.
>
> ipv4 access-list internet
> 10 permit ipv4 10.0.0.0/16 10.0.0.0/16
> 20 permit ipv4 10.0.0.0/16 any nexthop1 ipv4 x.x.x.x
>
>
>
> Where if it is from 10/16 to 10/16 it just gets routed normally and make
> sure that normal routing works right.
> Luck,
> Buz
>
> ----------
> buz.dale at usg.edu
> Network Support Specialist University System of GA -IT Services.
> 706-583-2052 or (Toll Free in GA) 888-875-3697
>
>
>
>
>
>
>
> On 7/13/15, 6:51 AM, "Alex William" <alex.william21 at outlook.com> wrote:
>
> >ipv4 access-list internet
> >10 permit ipv4 10.0.0.0/16 10.0.0.0/16 default
> > 20 permit ipv4 10.0.0.0/16 any nexthop1 ipv4 x.x.x.x
> >
>
More information about the cisco-nsp
mailing list