[c-nsp] ASR 903 RSP2 Control Plane Traffic QOS

[Caillin Bathern]

Hi List,

Just wondering if anybody has managed to configure traffic marking/scheduling for control and management plane traffic on the ASR 903 RSP2 (or ASR920)?
Configuring a control plane output service policy fails if you have any ACLs in your class maps..

ASR-903(config-cp)#service-policy output cp-out
QoS: Configuration failed. Can NOT match ACL in an output policy-map
QoS: Configuration errors for policymap cp-out
error: failed to install policy map cp-out
ASR-903(config-cp)#

Version is 03.15.00.S
asr900rsp2-universalk9_npe.03.15.00.S.155-2.S-std.bin

Cheers,
Caillin
-- 
This transmission or any part of it is intended solely for the named
addressee.  It is confidential.  The copying or distribution of this
transmission or any information it contains, by anyone other than the
addressee, is prohibited. CommTel Network Solutions cannot be held 
accountable for any comments, statements or attachments.

If you have received this transmission in error, please phone
  +61 3 8340 6100  or by reply e-mail to the sender.  If you are not the
named addressee, you must destroy the original transmission and its contents. 

You may not rely on electronically transmitted material unless 
requested that the transmission is subsequently confirmed by fax or letter.
Material transmitted to you should also be checked by reference 
to a hard copy of that material printed directly from our word processing system.

Message  protected by MailGuard: e-mail anti-virus, anti-spam and content filtering.http://www.mailguard.com.au/mg