[c-nsp] MTU / BGP

[Mark Tinka]

On 20/Jul/15 22:33, CiscoNSP List wrote:
> Thanks James!
>
>
> Well...I was on the right track with MTU, and disabling path discovery..but, Id only ever soft reset the sessions...hard reset of the bgp session was needed(As James suggested below), and I have one of the sessions up for 7 minutes....so ill do the other now.

Good to hear. I suppose that makes sense.


>
>
> Side note - It would be nice to be able to set mtu per neighbour purely for bgp (i.e. not have to change the physical Interface, or disable path mtu discovery)...

Juniper have this. I agree, Cisco need this too.

Mark.