[c-nsp] Cisco ASR1002x + SPA Adapter (SPA-1X10GE-L-V2) Issues

Troy Boutso sensible115 at gmail.com
Tue Jul 28 07:31:47 EDT 2015


Alexandr

I reinserted the damn thing like 10 + times and into multiple slots. :)

I really want to avoid reloading, especially if I'm not supposed to. Which
shouldn't be required for this task.

Has anyone else actually had to reload their appliance to get a SPA card to
work?

On Tuesday, 28 July 2015, Alexandr Gurbo <gurbo at golas.ru> wrote:

> Hello Troy,
>
> Try to re-insert or reload router.
> There are no commands to activate this module. We have the same SPA card
> in ASR1002x without problem.
>
>
> On Tue, 28 Jul 2015 19:35:12 +1000
> Troy Boutso <sensible115 at gmail.com <javascript:;>> wrote:
>
> > Hey guys
> >
> > Hopefully a real easy one, just incase I'm missing something obvious
> here.
> >
> > I have a Cisco ASR1002x router which is in urgent need of a 10GE upgrade.
> > So, I've purchased a 10Gigabit Ethernet SPA adapter - SPA-1X10GE-L-V2
> > <
> http://www.cisco.com/en/US/products/ps6267/products_data_sheet0900aecd804dc62d.html
> >.
> > I bought it from a Network hardware reseller. Cut a long story short..
> I've
> > gone to install the card into any one of the 3 SPA port slots on the
> router
> > and it isn't being detected.
> >
> > I know the card should support OIR so installing it should be simple and
> > easy.
> > The card isn't being recognised at ALL. Nothing. The light doesn't blink
> > nor does the router even think there is anything plugged into ANY of the
> > slots. Here are some show commands, which I think should be useful to
> > assist.
> >
> > I've installed SPA cards into ASR1001s before, though they were Gigabit.
> It
> > was simple. Plug in and good to go. Nothing else was needed!
> >
> > Am I missing something obvious? Do I need to issue some commands on this
> > router to "activate" it this time round?
> > I shouldn't need to reload the router?
> >
> >
> >  #sh hw-module subslot 0/1 ?
> > % The indicated slot/subslot number is empty
> >
> > #sh inventory
> > NAME: "Chassis", DESCR: "Cisco ASR1002-X Chassis"
> > PID: ASR1002-X         , VID: V02, SN:
> >
> > NAME: "Power Supply Module 0", DESCR: "Cisco ASR1002 AC Power Supply"
> > PID: ASR1002-PWR-AC    , VID: V03, SN: ART1824U0A8
> >
> > NAME: "Power Supply Module 1", DESCR: "Cisco ASR1002 AC Power Supply"
> > PID: ASR1002-PWR-AC    , VID: V03, SN: ART1824U0AS
> >
> > NAME: "module 0", DESCR: "Cisco ASR1002-X SPA Interface Processor"
> > PID: ASR1002-X         , VID:    , SN:
> >
> > NAME: "SPA subslot 0/0", DESCR: "6-port Built-in GE SPA"
> > PID: 6XGE-BUILT-IN     , VID:    , SN:
> >
> > NAME: "subslot 0/0 transceiver 0", DESCR: "GE T"
> > PID: SFP-GE-T-ASR      , VID: E   , SN: MTCGETC024115
> >
> > NAME: "subslot 0/0 transceiver 1", DESCR: "GE T"
> > PID: SFP-GE-T-ASR      , VID: E   , SN: MTCGETC024116
> >
> > NAME: "subslot 0/0 transceiver 2", DESCR: "GE T"
> > PID: SFP-GE-T-ASR      , VID: E   , SN: MTCGETC024117
> >
> > NAME: "subslot 0/0 transceiver 3", DESCR: "GE T"
> > PID: SFP-GE-T-ASR      , VID: E   , SN: MTCGETC024118
> >
> > NAME: "subslot 0/0 transceiver 4", DESCR: "GE T"
> > PID: SFP-GE-T-ASR      , VID: E   , SN: MTCGETC024120
> >
> > NAME: "subslot 0/0 transceiver 5", DESCR: "GE T"
> > PID: SFP-GE-T-ASR      , VID: E   , SN: MTCGETC024119
> >
> > NAME: "module R0", DESCR: "Cisco ASR1002-X Route Processor"
> > PID: ASR1002-X         , VID: V02, SN:
> >
> > NAME: "module F0", DESCR: "Cisco ASR1002-X Embedded Services Processor"
> > PID: ASR1002-X         , VID:    , SN:
> >
> > #sh ver
> > Cisco IOS XE Software, Version 03.13.01.S - Extended Support Release
> > Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M),
> > Version 15.4(3)S1, RELEASE SOFTWARE (fc3)
> > cisco ASR1002-X (2RU-X) processor (revision 2KP) with 1089555K/6147K
> bytes
> > of memory.
> > Processor board ID FOX1802H0VC
> > 6 Gigabit Ethernet interfaces
> > 32768K bytes of non-volatile configuration memory.
> > 4194304K bytes of physical memory.
> > 6684671K bytes of eUSB flash at bootflash:.
> >
> >
> > I really appreciate any help I can get
> > As always thanks in advance
> >
> > Troy
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net <javascript:;>
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
> --
> Alexandr Gurbo
>


More information about the cisco-nsp mailing list