[c-nsp] Cisco ASR1002x + SPA Adapter (SPA-1X10GE-L-V2) Issues

[Alexandr Gurbo]

Hello,

Try to reload subslot or check this SPA on another asr1k.
#hw-module subslot 0/3 reload


On Tue, 28 Jul 2015 21:31:47 +1000
Troy Boutso <sensible115 at gmail.com> wrote:

> Alexandr
> 
> I reinserted the damn thing like 10 + times and into multiple slots. :)
> 
> I really want to avoid reloading, especially if I'm not supposed to. Which
> shouldn't be required for this task.
> 
> Has anyone else actually had to reload their appliance to get a SPA card to
> work?
> 
> On Tuesday, 28 July 2015, Alexandr Gurbo <gurbo at golas.ru> wrote:
> 
> > Hello Troy,
> >
> > Try to re-insert or reload router.
> > There are no commands to activate this module. We have the same SPA card
> > in ASR1002x without problem.
> >
> >
> > On Tue, 28 Jul 2015 19:35:12 +1000
> > Troy Boutso <sensible115 at gmail.com <javascript:;>> wrote:
> >
> > > Hey guys
> > >
> > > Hopefully a real easy one, just incase I'm missing something obvious
> > here.
> > >
> > > I have a Cisco ASR1002x router which is in urgent need of a 10GE upgrade.
> > > So, I've purchased a 10Gigabit Ethernet SPA adapter - SPA-1X10GE-L-V2
> > > <
> > http://www.cisco.com/en/US/products/ps6267/products_data_sheet0900aecd804dc62d.html
> > >.
> > > I bought it from a Network hardware reseller. Cut a long story short..
> > I've
> > > gone to install the card into any one of the 3 SPA port slots on the
> > router
> > > and it isn't being detected.
> > >
> > > I know the card should support OIR so installing it should be simple and
> > > easy.
> > > The card isn't being recognised at ALL. Nothing. The light doesn't blink
> > > nor does the router even think there is anything plugged into ANY of the
> > > slots. Here are some show commands, which I think should be useful to
> > > assist.
> > >
> > > I've installed SPA cards into ASR1001s before, though they were Gigabit.
> > It
> > > was simple. Plug in and good to go. Nothing else was needed!
> > >
> > > Am I missing something obvious? Do I need to issue some commands on this
> > > router to "activate" it this time round?
> > > I shouldn't need to reload the router?
> > >
> > >
> > >  #sh hw-module subslot 0/1 ?
> > > % The indicated slot/subslot number is empty
> > >
> > > #sh inventory
> > > NAME: "Chassis", DESCR: "Cisco ASR1002-X Chassis"
> > > PID: ASR1002-X         , VID: V02, SN:
> > >
> > > NAME: "Power Supply Module 0", DESCR: "Cisco ASR1002 AC Power Supply"
> > > PID: ASR1002-PWR-AC    , VID: V03, SN: ART1824U0A8
> > >
> > > NAME: "Power Supply Module 1", DESCR: "Cisco ASR1002 AC Power Supply"
> > > PID: ASR1002-PWR-AC    , VID: V03, SN: ART1824U0AS
> > >
> > > NAME: "module 0", DESCR: "Cisco ASR1002-X SPA Interface Processor"
> > > PID: ASR1002-X         , VID:    , SN:
> > >
> > > NAME: "SPA subslot 0/0", DESCR: "6-port Built-in GE SPA"
> > > PID: 6XGE-BUILT-IN     , VID:    , SN:
> > >
> > > NAME: "subslot 0/0 transceiver 0", DESCR: "GE T"
> > > PID: SFP-GE-T-ASR      , VID: E   , SN: MTCGETC024115
> > >
> > > NAME: "subslot 0/0 transceiver 1", DESCR: "GE T"
> > > PID: SFP-GE-T-ASR      , VID: E   , SN: MTCGETC024116
> > >
> > > NAME: "subslot 0/0 transceiver 2", DESCR: "GE T"
> > > PID: SFP-GE-T-ASR      , VID: E   , SN: MTCGETC024117
> > >
> > > NAME: "subslot 0/0 transceiver 3", DESCR: "GE T"
> > > PID: SFP-GE-T-ASR      , VID: E   , SN: MTCGETC024118
> > >
> > > NAME: "subslot 0/0 transceiver 4", DESCR: "GE T"
> > > PID: SFP-GE-T-ASR      , VID: E   , SN: MTCGETC024120
> > >
> > > NAME: "subslot 0/0 transceiver 5", DESCR: "GE T"
> > > PID: SFP-GE-T-ASR      , VID: E   , SN: MTCGETC024119
> > >
> > > NAME: "module R0", DESCR: "Cisco ASR1002-X Route Processor"
> > > PID: ASR1002-X         , VID: V02, SN:
> > >
> > > NAME: "module F0", DESCR: "Cisco ASR1002-X Embedded Services Processor"
> > > PID: ASR1002-X         , VID:    , SN:
> > >
> > > #sh ver
> > > Cisco IOS XE Software, Version 03.13.01.S - Extended Support Release
> > > Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M),
> > > Version 15.4(3)S1, RELEASE SOFTWARE (fc3)
> > > cisco ASR1002-X (2RU-X) processor (revision 2KP) with 1089555K/6147K
> > bytes
> > > of memory.
> > > Processor board ID FOX1802H0VC
> > > 6 Gigabit Ethernet interfaces
> > > 32768K bytes of non-volatile configuration memory.
> > > 4194304K bytes of physical memory.
> > > 6684671K bytes of eUSB flash at bootflash:.
> > >
> > >
> > > I really appreciate any help I can get
> > > As always thanks in advance
> > >
> > > Troy
> > > _______________________________________________
> > > cisco-nsp mailing list  cisco-nsp at puck.nether.net <javascript:;>
> > > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> >
> > --
> > Alexandr Gurbo
> >


-- 
Alexandr Gurbo