[c-nsp] ASR920 - ISR4431

Mark Tinka mark.tinka at seacom.mu
Wed Jun 3 06:04:30 EDT 2015



On 3/Jun/15 11:59, Nick Cutting wrote:
> Thank you for the suggestion - I've been using these in the lab quite a bit lately as I've lost faith in GNS3 (watching it fall apart when showing clients proof of concept - "this won't happen on the real kit..")
> , however I am a little scared to run the internet vlan(s) into the esx estate at this time, there is a rather old fashioned security policy in place.
> Perhaps if we had dedicated hosts

We are using it for all our RR's for our network. That's 20x devices.

I recall one of our c-nsp members is running 2.5Gbps of traffic through
their CSR1000v deployment.

As it's IOS XE, it's fully featured (including Netflow, e.t.c.), and
will also hold several full tables in FIB.

Anyway, up to you.

Mark.


More information about the cisco-nsp mailing list