[c-nsp] ME3600 QinQ / Service Instance

[Waris Sagheer (waris)]

The configuration in your email is for local switching. If you have a PW between the two sites, you need to add xconnect configuration.
http://www.cisco.com/c/en/us/support/switches/me-3600x-series-ethernet-access-switches/products-implementation-design-guides-list.html

Best Regards,

[http://www.cisco.com/web/europe/images/email/signature/horizontal06.jpg]

Waris Sagheer
Technical Marketing Manager
Service Provider Routing Segment
waris at cisco.com<mailto:waris at cisco.com>
Phone: +1 408 853 6682
Mobile: +1 408 835 1389

CCIE - 19901


<http://www.cisco.com/>



This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.

For corporate legal information go to:http://www.cisco.com/web/about/doing_business/legal/cri/index.html



From: Dario Amaya <darioamaya82 at gmail.com<mailto:darioamaya82 at gmail.com>>
Date: Wednesday, June 3, 2015 at 2:29 PM
To: "cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>" <cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>>
Subject: [c-nsp] ME3600 QinQ / Service Instance

Hi list,

Hoping I can get some advice on a simple setup:

Two sites, each with an ME-3600X-24TS-M, L2VPN between the two on Te0/1.

ME3600-SiteA:

Te0/1 - L2VPN via PE
Te0/2 - Customer equipment

ME3600-SiteB:

Te0/1 - L2VPN via PE
Te0/2 - Customer equipment

I want to accept all tags from the customer port Te0/2 at both sites
and pass it across the L2VPN on Te0/1, back out on Te0/2 at the other
side and vice-versa.

Will the following config work:

interface TenGigabitEthernet0/1
switchport trunk allowed vlan none
switchport mode trunk
load-interval 30
service instance 1 ethernet
  encapsulation default
!
!
interface TenGigabitEthernet0/2
switchport trunk allowed vlan none
switchport mode trunk
load-interval 30
service instance 2 ethernet
  encapsulation default
!
!
connect eline-1-2 TenGigabitEthernet0/1 1 TenGigabitEthernet0/2 2

Thanks in advance.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/