[c-nsp] Cisco BGP AIGP

[Tim Durack]

Apparently supported in IOS-XR, but not IOS/IOS-XE. Too bad, looks
genuinely useful.

On Sun, Jun 7, 2015 at 9:36 AM, Mohammad Khalil <eng_mssk at hotmail.com>
wrote:

> I am not sure about the functionality , but the option under the vpnv4
> address-family exists
> RP/0/0/CPU0:XR1(config)#router bgp 1
>
> RP/0/0/CPU0:XR1(config-bgp)#neighbor 2.2.2.2
>
> RP/0/0/CPU0:XR1(config-bgp-nbr)#address-family vpnv4 unicast
>
> RP/0/0/CPU0:XR1(config-bgp-nbr-af)#?
>
>   aigp                    Enable AIGP for this neighbor
>
> BR,
> Mohammad
>
> > Date: Fri, 5 Jun 2015 14:40:00 -0400
> > From: tdurack at gmail.com
> > To: cisco-nsp at puck.nether.net
> > Subject: [c-nsp] Cisco BGP AIGP
>
> >
> > BGP AIGP has been added to some versions of IOS/IOS-XE/IOS-XR. Looks like
> > this feature is restricted to IPv4 and IPv6 AF though. Anyone know if
> AIGP
> > for VPNv4 and VPNv6 is supported or on the roadmap?
> >
> > --
> > Tim:>
> > _______________________________________________
> > cisco-nsp mailing list cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
Tim:>