[c-nsp] Issue while activating SMU in cisco ASR 9k1

[Noah]

On Mon, Jun 29, 2015 at 10:11 AM, thiyagarajan b <bn.thiyagarajan at gmail.com>
wrote:

> Hello,
> Observed error while activating the SMU CSCup93021 in ASR 9k1 XR5.1.2.
> Getting below error while activating.
>
> Install logs:
>     Install operation 12 '(admin) install activate
> disk0:asr9k-px-5.1.2.CSCup93021-1.0.0' started by user 'root' via CLI at
> 06:13:52
>     UTC Sat Jun 27 2015.
>     Info:     Install Method: Parallel Process Restart
>     Error:    Cannot proceed with the activation because the operation
> causes more processes to be restarted than the system
>     Error:    supports:
>     Error:        59 process restarts on node: 0/RSP0/CPU0.
>     Error:    Suggested steps to resolve this:
>     Error:     - check the installation instructions.
>     Error:     - check the reason for the high number of processes
> restarting using '(admin) show install log 12 verbose'.
>     Install operation 12 failed at 06:14:31 UTC Sat Jun 27 2015.
>
> Attaching the output of 'admin show install log 12 verbose'
>
>
> Any suggestions on the way it has to be activated?
>
>
Is there a chance there are dependencies in terms of other SMU which are
not yet added......

Otherwise you can try and run the below line of commands...

# admin
# install activate disk0:*5.1.2* synchronous


> Warm Regards,
> Thiyagarajan B
>

-- 
*./noah*