[c-nsp] Issue while activating SMU in cisco ASR 9k1

[thiyagarajan b]

Thanks Noah & Will,

Will try the ways suggested.


On Mon, Jun 29, 2015 at 3:37 PM, William McCall <william.mccall at gmail.com>
wrote:

> this will install fine as long as you make the asr9k reload as part of the
> install.
>
> can do it with "admin install activate <blah> parallel-reload".
>
> On Mon, Jun 29, 2015 at 12:11 AM, thiyagarajan b <
> bn.thiyagarajan at gmail.com> wrote:
>
>> Hello,
>> Observed error while activating the SMU CSCup93021 in ASR 9k1 XR5.1.2.
>> Getting below error while activating.
>>
>> Install logs:
>>     Install operation 12 '(admin) install activate
>> disk0:asr9k-px-5.1.2.CSCup93021-1.0.0' started by user 'root' via CLI at
>> 06:13:52
>>     UTC Sat Jun 27 2015.
>>     Info:     Install Method: Parallel Process Restart
>>     Error:    Cannot proceed with the activation because the operation
>> causes more processes to be restarted than the system
>>     Error:    supports:
>>     Error:        59 process restarts on node: 0/RSP0/CPU0.
>>     Error:    Suggested steps to resolve this:
>>     Error:     - check the installation instructions.
>>     Error:     - check the reason for the high number of processes
>> restarting using '(admin) show install log 12 verbose'.
>>     Install operation 12 failed at 06:14:31 UTC Sat Jun 27 2015.
>>
>> Attaching the output of 'admin show install log 12 verbose'
>>
>>
>> Any suggestions on the way it has to be activated?
>>
>>
>> Warm Regards,
>> Thiyagarajan B
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>
>
>
> --
> William McCall
>