[c-nsp] ASR903 dir Error

[Mohammad Khalil]

Hi
I have Cisco ASR 903 with two RSPs
When I console to one for the RSPs , i am in the rommon mode
When I try to browse for the bootflash , I get the below message
rommon 1 > dir bootflash:
 
ERROR:: PRSSTAT.BREN is NOT set. Data xfr incomplete
 
FAILURE
 prsstat ff8d0206 not ESDHC_PRSSTAT_BREN i= 
0esdhc_wait_for_status_clr(556) ERR: bitmask=0x00000002 not clr PRSSTAT =
 0xff8d0206 i=100000
sd_read_sector(1464) failed
Disk Error : Unable to read the drive'spartition table

From the other RSP , when I issue the show platform command , the same RSP show as unknown

Any ideas?

BR,
Mohammad