[c-nsp] AToM

[Mohammad Khalil]

Hi all
I am trying to establish AToM between 7613 and 3600
The module from the 7613 side is 7600 ES+ 20xGE SFP 

3600#sh run int vlan 183
interface Vlan183
 no ip address
 xconnect 172.20.40.7 7232183 encapsulation mpls

7613#sh run int vlan 183
interface Vlan183
 no ip address
 load-interval 30
 xconnect 172.20.40.232 7232183 encapsulation mpls

7613#sh mpls l2transport vc 7232183

Local intf     Local circuit              Dest address    VC ID      Status    
-------------  -------------------------- --------------- ---------- ----------
Vl183          Eth VLAN 183               172.20.40.232   7232183    UP

3600#sh mpls l2transport vc 7232183

Local intf     Local circuit              Dest address    VC ID      Status
-------------  -------------------------- --------------- ---------- ----------
Vl183          Eth VLAN 183               172.20.40.7     7232183    DOWN 

I have tried to configure L3VPN (VRF on both routers and test loopback interfaces) and it worked fine 

Any ideas?

BR,
Mohammad