[c-nsp] AToM

[Mark Tinka]

On 24/Mar/15 09:49, Mohammad Khalil wrote:
> Hi all
> I am trying to establish AToM between 7613 and 3600
> The module from the 7613 side is 7600 ES+ 20xGE SFP
>
> 3600#sh run int vlan 183
> interface Vlan183
>   no ip address
>   xconnect 172.20.40.7 7232183 encapsulation mpls
>
> 7613#sh run int vlan 183
> interface Vlan183
>   no ip address
>   load-interval 30
>   xconnect 172.20.40.232 7232183 encapsulation mpls
>
> 7613#sh mpls l2transport vc 7232183
>
> Local intf     Local circuit              Dest address    VC ID      Status
> -------------  -------------------------- --------------- ---------- ----------
> Vl183          Eth VLAN 183               172.20.40.232   7232183    UP
>
> 3600#sh mpls l2transport vc 7232183
>
> Local intf     Local circuit              Dest address    VC ID      Status
> -------------  -------------------------- --------------- ---------- ----------
> Vl183          Eth VLAN 183               172.20.40.7     7232183    DOWN
>
> I have tried to configure L3VPN (VRF on both routers and test loopback interfaces) and it worked fine
>
> Any ideas?

Detailed output?

Mark.