[c-nsp] AToM

[Mohammad Khalil]

Yes the interface facing the customer is up/up
The MTU to be set on the customer interface u mean?


> Subject: Re: [c-nsp] AToM
> From: lennon at orcon.net.nz
> Date: Tue, 24 Mar 2015 21:11:25 +1300
> CC: cisco-nsp at puck.nether.net
> To: eng_mssk at hotmail.com
> 
> What's the mtu of the 2 vlans? I always set the mtu in the xconnect stanza.
> 
> Sent from my iPhone
> 
> > On 24/03/2015, at 8:49 pm, Mohammad Khalil <eng_mssk at hotmail.com> wrote:
> > 
> > Hi all
> > I am trying to establish AToM between 7613 and 3600
> > The module from the 7613 side is 7600 ES+ 20xGE SFP 
> > 
> > 3600#sh run int vlan 183
> > interface Vlan183
> > no ip address
> > xconnect 172.20.40.7 7232183 encapsulation mpls
> > 
> > 7613#sh run int vlan 183
> > interface Vlan183
> > no ip address
> > load-interval 30
> > xconnect 172.20.40.232 7232183 encapsulation mpls
> > 
> > 7613#sh mpls l2transport vc 7232183
> > 
> > Local intf     Local circuit              Dest address    VC ID      Status    
> > -------------  -------------------------- --------------- ---------- ----------
> > Vl183          Eth VLAN 183               172.20.40.232   7232183    UP
> > 
> > 3600#sh mpls l2transport vc 7232183
> > 
> > Local intf     Local circuit              Dest address    VC ID      Status
> > -------------  -------------------------- --------------- ---------- ----------
> > Vl183          Eth VLAN 183               172.20.40.7     7232183    DOWN 
> > 
> > I have tried to configure L3VPN (VRF on both routers and test loopback interfaces) and it worked fine 
> > 
> > Any ideas?
> > 
> > BR,
> > Mohammad
> >                         
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/