[c-nsp] Logs are empty

[Michael Malitsky]

True.  However, "logging monitor" plus "terminal monitor" change absolutely nothing.

I do expect more messages in the buffer, especially after having debugs turned on, for traffic that I know is transiting the router.  At least acknowledgements of configuration changes.  Something, besides messages incident to the router booting up.  BTW, these 13 did not show up until 3-4 hours after boot.
Thanks

Sincerely,
Michael 

-----Original Message-----
From: Lukas Tribus [mailto:luky-37 at hotmail.com] 
Sent: Tuesday, May 12, 2015 12:39 PM
To: Michael Malitsky; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] Logs are empty

> Working with a brand new 2911, 15.4(3)M2. I can't get anything to show 
> up in the logs.
> Neither monitor

Which is disabled via "no logging monitor", so that should be expected?



> nor buffer

The "show logg" contains 13 messages from the buffer logging. Do you expect something else?


Lukas