[c-nsp] Logs are empty

[Chuck Church]

Plus there were thousands of syslogs that were dropped.  I'm assuming
because no hosts look to be configured?  Not sure they that's not getting to
the buffer though.

Chuck

-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
Michael Malitsky
Sent: Tuesday, May 12, 2015 2:27 PM
To: Lukas Tribus; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Logs are empty

True.  However, "logging monitor" plus "terminal monitor" change absolutely
nothing.

I do expect more messages in the buffer, especially after having debugs
turned on, for traffic that I know is transiting the router.  At least
acknowledgements of configuration changes.  Something, besides messages
incident to the router booting up.  BTW, these 13 did not show up until 3-4
hours after boot.
Thanks

Sincerely,
Michael 

-----Original Message-----
From: Lukas Tribus [mailto:luky-37 at hotmail.com]
Sent: Tuesday, May 12, 2015 12:39 PM
To: Michael Malitsky; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] Logs are empty

> Working with a brand new 2911, 15.4(3)M2. I can't get anything to show 
> up in the logs.
> Neither monitor

Which is disabled via "no logging monitor", so that should be expected?



> nor buffer

The "show logg" contains 13 messages from the buffer logging. Do you expect
something else?


Lukas

 		 	   		  
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/