[c-nsp] ASR903 Service instance MTU

[Mohammad Khalil]

Hi all
I have discovered that I can change the MTU as the below syntax
interface GigabitEthernet0/0/1
 no ip address

 service instance 100 ethernet
xconnect x.x.x.x {VC_ID} encapsulation mpls
mtu {}

But If I configured the below
l2vpn xconnect context {NAME}

There is no option for the MTU under it 

> From: sigurbjornl at vodafone.is
> To: ggiannou at gmail.com; eng_mssk at hotmail.com
> CC: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] ASR903 Service instance MTU
> Date: Sat, 7 Nov 2015 07:12:35 +0000
> 
> Yes, you can, providing the MTU you are setting for the xconnect is lower than the interface MTU, if it is not, the command will (at least in XE 3.13) change the MTU of the interface that has the service instance
> 
> Kind regards,
> Sibbi
> 
> 
> 
> On 07/11/15 05:59, "cisco-nsp on behalf of George Giannousopoulos" <cisco-nsp-bounces at puck.nether.net on behalf of ggiannou at gmail.com> wrote:
> 
> >Hi,
> >
> >I can't really test it right now, but you should be able to adjust MTU as a
> >sub-command of xconnect, under the service instance.
> >
> >--
> >George
> >
> >On Sat, Nov 7, 2015 at 12:03 AM, Mohammad Khalil <eng_mssk at hotmail.com>
> >wrote:
> >
> >> Hi all
> >> I was wondering on ASR903 , can I adjust MTU under the service instance ?
> >> I can do that under the BDI interface , but that will do it for me ?
> >>
> >> BR,
> >> Mohammad
> >>
> >> _______________________________________________
> >> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/cisco-nsp
> >> archive at http://puck.nether.net/pipermail/cisco-nsp/
> >>
> >_______________________________________________
> >cisco-nsp mailing list  cisco-nsp at puck.nether.net
> >https://puck.nether.net/mailman/listinfo/cisco-nsp
> >archive at http://puck.nether.net/pipermail/cisco-nsp/