[c-nsp] ASR903 Service instance MTU

[Lukas Tribus]

Hi Mohammad,


> Hi all
> I have discovered that I can change the MTU as the below syntax
> interface GigabitEthernet0/0/1
> no ip address
>
> service instance 100 ethernet
> xconnect x.x.x.x {VC_ID} encapsulation mpls
> mtu {}
>
> But If I configured the below
> l2vpn xconnect context {NAME}
>
> There is no option for the MTU under it


You have to configure it on the pseudowire interface:
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_l2_vpns/configuration/xe-3s/mp-l2-vpns-xe-3s-book/mp-any-transport-xe.html#concept_B3B085AFF0384B5C867E3EF9A4C58564



Lukas