[c-nsp] ASR903 Service instance MTU

[Mohammad Khalil]

Thanks Lukas
What am facing actually is that I got a request from my customer to raise the MTU for all his L2VPN connections (VFI,XCONNECT) 
AM afraid if I raised the MTU on the pseudowire interface while the physical interface MTU is still 1500 to cause an issue

> From: luky-37 at hotmail.com
> To: eng_mssk at hotmail.com; sigurbjornl at vodafone.is; ggiannou at gmail.com
> CC: cisco-nsp at puck.nether.net
> Subject: RE: [c-nsp] ASR903 Service instance MTU
> Date: Sun, 8 Nov 2015 19:00:14 +0100
> 
> Hi Mohammad,
> 
> 
> > Hi all
> > I have discovered that I can change the MTU as the below syntax
> > interface GigabitEthernet0/0/1
> > no ip address
> >
> > service instance 100 ethernet
> > xconnect x.x.x.x {VC_ID} encapsulation mpls
> > mtu {}
> >
> > But If I configured the below
> > l2vpn xconnect context {NAME}
> >
> > There is no option for the MTU under it
> 
> 
> You have to configure it on the pseudowire interface:
> http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_l2_vpns/configuration/xe-3s/mp-l2-vpns-xe-3s-book/mp-any-transport-xe.html#concept_B3B085AFF0384B5C867E3EF9A4C58564
> 
> 
> 
> Lukas
>