[c-nsp] L2VPN Configuration on ASR920

[Alireza Soltanian]

Thanks. I will check this but I dont know why the traffic is discarded at
input. I am sure L2 connectivity between ASR PE and CE is ok.
On 21 Sep 2015 16:43, "Alireza Soltanian" <soltanian at gmail.com> wrote:

> Hi Everybody
>
> Recently, we purchased ASR920. We want to establish L2VPN connection
> between this router and other PE router which is Cisco.
>
> IP/Routing and MPLS is fine. L2VPN connection is established but there is
> an issue.
>
> The traffic does not enter L2VPN but it exits it when it is sent by remote
> PE.
>
> I used this configuration on ASR920:
>
>
>
> interface GigabitEthernet0/0/4
>
> no ip address
>
> media-type auto-select
>
> negotiation auto
>
> service instance 1 ethernet
>
>   encapsulation dot1q 2631
>
>   rewrite ingress tag pop 1 symmetric
>
>   xconnect 10.234.233.29 2631 encapsulation mpls
>
>
>
> And this what I have when CE on remote PE pings CE on ASR:
>
>
>
> ASR920#show mpls l2transport vc detail | include totals
>
>     transit packet totals: receive 9, send 0
>
>     transit byte totals:   receive 828, send 0
>
>
>
> I hope you can help me in this regard
>
>
>
> Thank you
>
>
>