[c-nsp] ASR1006 IOS-XE-03.16.03.S - minor problem

[Jens Sandberg Andersen]

Hi list

After upgrading my asr1006 to version 03.16.03.S, my network management system (HP OpenView v 9.0) can no longer do a proper hardware inventory.

Older XE version:
name             Model Name                Type                                              Serial                    Firmware      HW-ver     Software version
module 0      ASR1000-SIP40             cevModuleASR1000SIP40    JAE183800QV     15.3(3r)S      V02           03.13.02.S.154-3.S2-ext
module F0     ASR1000-ESP40           cevModuleASR1000ESP40   JAE183504TX     15.2(1r)S       V02           03.13.02.S.154-3.S2-ext
module R0     ASR1000-RP2                cevModuleASR1000RP2      JAE183806E9     15.2(1r)S       V05            03.13.02.S.154-3.S2-ext
SPA subslot   SPA-1X10GE-L-V2        cevSpa1p10GeXfpV2          SAL183608ZD     1.9                   V04
subslt xver 0 XFP-10GLR-OC192SR   cevXFPOc192smlr2              b1cyltz30023                               A


XE 3.16.03.S
name          Model Name          Type                  Serial          Firmware      HW-ver     Software version
1                                                       cpu-3100              0                                       15.2(1r)S    03.16.03.S.155-3.S3-ext
2                                                      cpu-accessPro    0                                       15.2(1r)S    03.16.03.S.155-3.S3-ext
3                                                     cpu-4000                0                                      15.3(3r)S    03.16.03.S.155-3.S3-ext

No entries for subslots or transceivers, no serialnumber, wrong hardware-version.

I found nothing in the releasenotes that could explain this.

What is going on?

Jens S Andersen                               Email:  jsa at its.aau.dk
Aalborg University                           Telf:   9940 9464
Selma Lagerløfs Vej 300, 3.1.12   Fax:    9940 7593
9220 Aalborg
Denmark